hdm wr_laser_power_exp wpowere Thermal Alternate laser power servo setpoint value used when running the head in laser modes 1 or 2 which are exposure modes available starting with thermal head firmware 1.50 (needs matching MPE version as well). Identical to wpower except that the value is automatically modified every time the machine is reset, the media type changed or the "sys tstk" timer times out. The wpowere value is calculated from the power out of the head as measured by the nose piece sensor, the drum speed, the swath width, the drum diameter and the media sensitivity as specified in "media sens". See the description for wpower for further details. real

0.000

0.000 to 30.000 [watts]

Applies to Thermal Head firmware version 1.30 and above cal

../nvs/hdm_cal_wpower.xmlNVS: hdm wpower

../nvs/head_cal_wpwrcal.xmlNVS: head wpwrcal

../nvs/head_cfg_lsrmode.xmlNVS: head lsrmode

../nvs/sys_cfg_tstk.xmlNVS: sys tstk

../nvs/hdm_cal_sens.xmlNVS: hdm sens

../nvs/hdm_cal_sensadj.xmlNVS: hdm sensadj

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:36:54 2008 PST